Trend

Display: List / Grid
Show:
Sort By:
Trend Unibase Universal Router Sub Base
Trend Unibase Universal Router Sub Base Features The Unibase enables routers with non-standard guide bush fittings to accept the ..
£16.14
Ex VAT: £13.45
-
+
Trend Door Holding Clamp for Drilling and Routing
Trend D/CLAMP/A Door Holding Clamp Features No set-up time needed. No more searching for alternative door stops. Padd..
£22.68
Ex VAT: £18.90
-
+
Trend T4EK 1/4in Variable Speed Router 850W - 240V
Trend T4EK 850 Watt Variable Speed Router Features Variable speed control. Spindle lock. Hex collet nut allows easy c..
£106.56
Ex VAT: £88.80
-
+
Trend Router Guide Bush for Hinge Jig 16mm Diameter
Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with ..
£11.82
Ex VAT: £9.85
-
+
Trend Door Holding Stand for Drilling and Routing
Trend Door Holding Stand Features Holds door on its edge while routing hinge recess & mortise for locks. Holds door sec..
£49.68
Ex VAT: £41.40
-
+
Trend Anglefix Mitre Guide
Trend Anglefix Mitre Guide Features Cutting of frames, skirting, architrave and beading as well as basic marking out. Halve..
£21.18
Ex VAT: £17.65
-
+
Trend Pocket Hole Plug Jig Set
Trend Pocket Hole Plug Cutter Set Features Used in combination with Screwsinks to prepare perfectly sized plugs to fill counterbo..
£71.82
Ex VAT: £59.85
-
+
Trend Lock Jig
Trend LOCK/JIG Lock Jig Featues The jig requires a router fitted with a 30mm guide bush and 12mm diameter long reach cutter. ..
£103.44
Ex VAT: £86.20
-
+
Trend Craft Dovetail Jig 300mm
Trend Craft Dovetail Jig 300mm Features Up to 300mm width capacity. An accurate and easy to use Dovetail Jig for a variety ..
£120.42
Ex VAT: £100.35
-
+
Trend Kitchen Worktop Jig Offset Scriber
Trend Kitchen Worktop Jig Offset Scriber Features Gives offset between worktop jig and guide bush for ease of setting up. A..
£22.14
Ex VAT: £18.45
-
+
Trend Kitchen Worktop Jig 900mm
Trend Kitchen Worktop Features Cuts up to 40mm thick worktops with or without anti-drip postformed edge. Fixed lengths for ..
£163.80
Ex VAT: £136.50
-
+
Trend Kitchen Worktop Jig 500mm - 650mm
Trend Kitchen Worktop Jig Features Will produce a joint in 15 minutes including setting-up time. Integral panel bolt connec..
£112.74
Ex VAT: £93.95
-
+
Trend Digital Angle Rule - 200mm
Silverline Digital Rule Features Length 200mm folded (400mm extended). 400mm rule digital angle rule that calculates angles..
£22.14
Ex VAT: £18.45
-
+
Trend Digital Angle Rule - 500mm
Silverline Digital Rule Features Auto-shut off in 6 minutes. Ideal for woodworking, construction and machining. 1000m..
£32.76
Ex VAT: £27.30
-
+
Trend Chisel and Plane Iron Honing Guide
 Trend Chisel and Plane Iron Honing Guide Features Ensure correct angle is maintained on bevel edge chisels and plane irons ..
£49.20
Ex VAT: £41.00
-
+