Why Shop at Transtools?

Low Prices on Trade Tools
Trade Accounts Welcome
Secure Online Payments

Rustins Quick Drying Plastic Wood Filler Teak Tube

Rustins Quick Drying Plastic Wood Filler Teak Tube
Brand: Rustins
Product Code: RUSPWTETU
Barcode: 5015332220014
Price: £2.16
Currently Out Of Stock

Rustins PWNATU Teak Quick Drying Plastic Wood Filler Features

  • Shade: Teak.
  • Quick drying wood filler for the repair of mouldings and broken edges, filling cracks and holes.
  • Can be cut, filed, drilled and planed. When dry will take screws and nails.
  • Can be used on wood, metal and stone.
  • The surface must be cleaned and dry and for best adhesion slightly roughened.
  • Apply in thin layers with applicator or filling knife.
  • When hard apply further layers, making sure that the final application has is higher than the surrounding area.
  • When plastic wood has hardened, sand smooth.
  • As many layers can be applied as required.
  • Drying Time is approx 4-6 hours, deeper holes may take longer.
  • Application Temperature is ideally 15-25°C. Do not use below 5°C, or in conditions of high humidity.
  • Can be painted, varnished or stained. Please be aware that when stained, colour may vary from surrounding wood.
  • Stir thoroughly before use as settlement may have occurred.
  • The shelf life of the product in an airtight container is indefinite. It is preferable to store the product in a cool dry place.
  • It is important to replace the lid and ensure an airtight seal.
  • This is highly flammable. Keep out of reach of children. Use only in well ventilated areas.
  • Keep away from sources of ignition – no smoking. Avoid contact with skin and eyes.
  • After contact with skin, wash immediately with plenty of soap and water or a proprietary skin cleanser.
  • Do not use solvent or White Spirit.
  • A full health & safety data sheet is available on request.
  • Clean tools with Cellulose Thinners.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: