Why Shop at Transtools?

Low Prices on Trade Tools
Trade Accounts Welcome
Secure Online Payments

Rustins Plastic Furniture Coating

Rustins Plastic Furniture Coating
Brand: Rustins
Barcode: 5015332400010
Only 12 In Stock

Rustins Plastic Furniture Coating Starter Set Features

  • 250ml lacquer.
  • 63ml hardener.
  • 135ml thinners.
  • Small burnishing paste.
  • Instructions.
  • A two-part cold cure finish, based on Urea Formaldehyde resins, plasticised with alkyd and reinforced with malamine.
  • The finish is highly durable, heat resistant, resistant to impact, abrasion and solvents.
  • Intended use Bare wood, Veneered wood, hardboard, MDF and unsealed cork.
  • For interior use only.
  • Quick-drying.
  • Non-yellowing on ageing.
  • Tough, chemically resistant and heat resistant finish.
  • Enhances the colour of the wood.
  • May be burnished to give mirror like finish using Rustins Burnishing Cream.
  • The coating is almost colourless, but some woods may darken slightly.
  • See product packaging for further information.
  • The surface must be clean, smooth, dry and free from wax, dust and contaminants.
  • Read the full instructions on the tin.
  • Nail holes and small cracks may be filled with Rustin’s Woodstopping.
  • Bare wood may be dyed before coating with Rustin’s penetrating Wood Dye.
  • Other brands of dye & stain may be incompatible.
  • Do not apply Knotting or Sanding Sealer.
  • The mixing ratio is 1 part Hardener to 4 parts Coating by volume.
  • Once mixed, may be used for two days, if covered and kept in cool place.
  • Application Using a brush or roller, apply evenly and liberally, finishing in the direction of the grain.
  • 2 coats are usually sufficient on hardwood, Softwoods and cork may require a minimum of 3 coats, depending on the absorbency of wood.
  • Drying Time The coating is generally touch-dry within 30 minutes–1 hour, depending on the temperature.
  • Re-coating Time May be re-coated once the previous coat is touch-dry.
  • Application Temp. Ideally 15-25°C.
  • Do not use below 15°C, or in conditions of high humidity.
  • Coverage 13-15 sq.m per litre, 1 coat, depending on the absorbency of the wood.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: