Why Shop at Transtools?

Low Prices on Trade Tools
Trade Accounts Welcome
Secure Online Payments

Leadax Lead Alternative

Leadax Lead Alternative
Leadax Lead Alternative Leadax Lead Alternative Leadax Lead Alternative
Brand: Cromar
Product Code: CROKLD250
Barcode: 8719558741687
In Stock

Leadax Lead Alternative Features

  • Length 6 metre.
  • Width 250mm / 10in.
  • Colour grey.
  • Leadax is patented and has been certified by the BBA.
  • Install Leadax in the same manner as you would lead.
  • Leadax can be used in any climate worldwide (-50 degree c / + 100 degee c).
  • Leadax can be installed from - 20 degree c (trimming, cutting, folding and beating) at lower temperatues (less than 5 degree c) the material is more difficult to process.
  • Long lengths of leadax can be installed without any problems.
  • The maximum length is the length of the roll and a minimum overlap for 60mm is sufficient.
  • Overlaps can be hot welded or sealed with Polyflex sealant.
  • The recommeded welding temperature is 350 - 450 degree c using a seam roller to press down the welded seam.
  • Use Polyflex for overlaps in masonry (100mm / 4in).
  • In places and areas which are frequently exposed to wind, lead can be secured using Polyflex.
  • When molded or used in facing materials, we recommend securing with Polyflex.
  • Insure that the base material is dry and clean.
  • Leadax can be fastened to joints using Leadax fixing clips.
  • Use seam rollers and lead beaters to mould the Leadax.
  • After application, remove the protective film for the face and reverse.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: