Why Shop at Transtools?

Low Prices on Trade Tools
Trade Accounts Welcome
Secure Online Payments

Forge Tabular Mortice Latch

Forge Tabular Mortice Latch
Brand: Forge
Product Code: FGETUBLNC3
Barcode: 5023969301990
In Stock
  • The Forge Tubular Mortice Latch for internal doors can be used with any lever latch handle.
  • Case size: 76mm (3 inch).
  • Backset size: 76mm.
  • Forend finish: Nickel.
  • Supplied with matching screws, face plate and strike.
  • Fitting Instructions:
  • Mark a height line on door face and edge as well as a centre line on door edge.
  • Drill a Ø23mm hole into door edge to accept the latch body, and a Ø19mm hole in door face for the spindle bar measuring from the door edge (43mm for 65mm latch, 60mm for 80mm latch).
  • Fit latch and use a pencil to mark around the faceplate. Chisel out so the faceplate lies flush with door edge.
  • Transfer the height line onto the door frame and mark a vertical line at half the door thickness from the door stop.
  • Drill a Ø16mm hole, 10mm deep at this point and square out with a chisel. Position the striking plate over this hole, mark around with a pencil and chisel out to lie flush.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: