Why Shop at Transtools?

Low Prices on Trade Tools
Trade Accounts Welcome
Secure Online Payments

Forge Door Bolt Necked 75mm

Forge Door Bolt Necked 75mm
Brand: Forge
Product Code: FGEDBLTNBR2
Barcode: 5023969301846
In Stock
  • This Forge internal Door Bolt is used for securing doors or cupboards.
  • The necked version can be used for outward opening doors.
  • Made from solid brass and lacquered for a long lasting finish.
  • Supplied with screws and fitting instructions.
  • Size: 75mm (3 inch).
  • Finish: Brass.
  • Fitting Instructions:
  • Postion door bolt on the door face so that the end of the doorbolt is in line with the door edge and mark the screwholes with a pencil.
  • Drill pilot holes using a Ø2mm drillbit and fasten in place using supplied screws.
  • If being installed on an outward opening door use a necked version:- Drill a Ø8mm hole, 16mm deep in line with the bolt and screw the flat keep into position over this hole.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: