Trend DC400 Dovetail Jig

Trend DC400 Dovetail Jig Features

• DC400 dovetail centre is the breakthrough you have been waiting for. It is the world's first variable layout dovetail jig that is completely free of adjustment.
• You can change through dovetails to lapped dovetails, adjust the pin and tail guide finger posistions, change work-piece thickness all without adjustment.
• Now you can have the professional look of hand cut dovetails without the hassles of a complicated jig.
• Two guide rails provide full support for your router base, so you do not have to balance your router on the edge of guide fingers as per conventional jigs.
• Carbon fibre finger guides click directly into the rear guide rail, engaging in an index strip at increments of 2.5mm.
• This guarantees true repeatability and means you can restore or reposition guide fingers with absolute accuracy.
• There are three types of pin guide; angled pin guides for cutting through dovetail pins are available in five different angles from 7 up to 20 degrees.
• Common fork-shaped tail guides for cutting through and lapped tails; and the straight sided pin guides for cutting lapped pins.
• Fully enclosed body with a removeable window ensures routed waste is directed away from the operator and provides good visibility.
• The optional snap-in waste collection kit will also remove almost 100% of the waste.
• Clamping channels with two independent parallel clamping bars require only a single hand to operate, enabling the free hand to position the work-piece.
• The clamping bars and integral side fences are posistioned close to the machining area , to ensure total security.