Polycell Smoothover For Cracked and Damaged Walls 2.5 Litre

Polycell Smoothover Features

• SmoothOver your damaged walls.
• A quick and easy way to transform cracked and damaged walls to a perfectly smooth surface that's ready to paint.
• Fills imperfections such as cracks, gouges and small holes.
• Dries in 6 hours.
• For plaster, plasterboard and painted masonry surfaces.
• for maximum depth coverage of 2mm.
• 2.5 litre tin.

How To apply Polycell Smoothover

• Make sure surfaces are clean and sound and remove any loose particles or mould. Seal stains with Polycell Stain Stop.
• Touch in any nail heads or screws with gloss paint to prevent corrosion and fill any holes or cracks greater than 2mm with an appropriate Polycell Polyfilla.
• Start by stirring the Polycell SmoothOver to a creamy consistency.
• Then load the Polycell SmartSmoother with product.
• It's best to work with approximately 2cm depth across the full width of the blade.
• Apply the Polycell SmoothOver to the walls, smoothing the product across the surface to just fill the cracked and damaged areas.
• Scrape off any excess product leaving a thin film across the whole wall.
• Work away from the edges and focus on a small area at a time.
• Always prepair and test a small area first.
• Reload the SmartSmoother as needed.
• Don't worry about small irregularities or tramlines as these can be removed by light sanding when the product is dry.
• Apply a second coat if required.
• Wash tools in warm soapy water.
• Your walls are now ready to paint.
• Coverage 2.5 litres will cover up to 5m2 on a 1mm deep textured surface (average layer thickness 0.5mm)
• Tools required Polycell SmartSmoother tool.