Proxxon DSH/E Scroll Saw Variable Speed 240V

Proxxon DSH/E Scroll Saw Features

• The perfect machine for tool and die making, model building, toy repairs, puzzle sawing, architectural work, antique restoration etc. Absolutely safe: ideal for schools and training centres.
• Super cutting capacity (wood to 50 mm, plastics 30 mm, non-ferrous metals 10 mm) and yet runs with only a low hum.
• Problem-free - even when cutting acrylics, fibreglass, polystyrene foams, rubber, leather and cork. Air blower with adjustable nozzle provides clear visibillity of work piece and cutting line.
• Machine base of cast iron for vibration-free operation and stability.
• Sturdy aluminium die-cast table (tilts up to 45° for mitre sawing).
• Twin cast iron saw over-arm with ball bearing direct drive and knob for tensioning blade.
• Standard commercially available pin blades can be rapidly fitted and stored in the special compartment on the side of the machine. The clamping jaws also clamp plain end blades.
• 220 - 240 Volt, two speed 990 / 1500 strokes/min. Stroke length 19 mm.
• Table 362 x 180 mm (tilts up to 45° for mitre cutting).
• Max. throat depth 400 mm, max. depth of cut 50 mm (25 mm at 45° table tilt).
• Weight 20 kg, depth 53 cm, height 30 cm, width 28 cm.
• Complete with 5 each coarse and fine blades and T allen key.