Suitable for charging all Metabo NiCd and NiMH Batteries from 4.8v - 18v.
Monitored charging with micro-controller.
Battery diagnosis.
Charge time approx 15 minutes.
Up to 3000 re-charge cycles.
Air cooled Function.
240v only
Monitored charging with mirco-controller: the battery pack is charged with 2 ampere for 60 seconds and then with 5 ampere with constant monitoring of voltage flow, temperature flow and maximum temperature.
The charger ends the charging process immediately after full charging.
Thus, there is no overcharging, the life of the battery is increased, and as a result they can be charged up to 3000 times.
Charger switches to compensation charge: to conserve the capacity, the battery is charged for 0.1 second every 3.8 seconds with 2 ampere.
Features
KSAP 18-18v circular saw.
BSZ 18 impul 18 drill/driver.
ASE 18-18v sabre saw.
MLA Torch: to light up your job (spare bulb included).
AC 30min charger 240v.
…
Features
18V - 2.0AH.
Why Air-cooled?
The cooler a battery is when charging, the faster it can be used again.
Every battery heats up when used, which impedes an immediate, ef…
Features
14.4V - 2.0AH.
Why Air-cooled?
The cooler a battery is when charging, the faster it can be used again.
Every battery heats up when used, which impedes an immediate, …
Features
12V - 2.0AH.
Why Air-cooled?.
The cooler a battery is when charging, the faster it can be used again.
Every battery heats up when used, which impedes an immediate, e…