Arbortech AS160 Allsaw

Arbortech AS160 Allsaw Features

• Using a unique patented orbital cutting motion and two forward facing blades, the AS160 is able to perform with degrees of effectiveness and safety, which were previously impossible.
• This award winning cuttting action which combines a hammering and cutting motion offers the advantages of safety, low dust, deep square and dry cutting.
• Designed for the professional, the AS160 cuts materials ranging from bricks, mortar, wood and tree roots in the ground!
• Cuts fast - save time on chiselling, cleaning and rendering by cutting square to full depth of cut.
• The AS160 cuts faster than any existing reciprocating saw and as fast as most small angle grinders.
• Visibilty - The unique blade position allows clear visibility of the material while cutting.
• Cuts square - the AS160 is able to cut square corners, requiring no over cutting.
• Plunge cuts - use the AS160 to cut directly into flush walls without stitch drilling.
• Cuts Safe - Unlike disc cutters the AS160 does not throw dust into the air, or kick back.
• Cuts Dry - Cuts masonry materials dry, with significantly less respirable dust than disc cutters.
• Cuts Deep - The AS160 is the only small, handheld saw able to cut to depths of 120mm (Plunge Blade) in masonry materials.

The Arbortech AS160 Allsaw cuts more

• Building materials - bricks (up to 50MPa), mortar, fibre cement and fast block.
• Rock - soft sandstone, natural Limestone and soft to medium stone.
• Wood - hard wood, chip or plywood, dirty wood and tree roots in the ground.
• Plastics - Foam, UPVC, acrylic fibreglass sheet.
• The AS160 is ideal for cutting mortar, brickwork and composite material in established and furnished houses.
• It has the ability to plunge cut to depths of 120mm, cut square corners and cut to single brick height.

Arbortech AS160 Allsaw Specifications

• Maximum cutting depth GP: 115mm (4'1/2") PB: 125mm (5").
• Cutting width: 6.5mm/7.2mm (1/4"), depending on blades.
• Weight, with cutting blades: 4.3kg (9.5lb).
• Dimensions without blades: 345mm (13 1/2") 75mm (3") 210mm (8 1/4").
• Noise Level: 108 db max. at 1.0m.
• No load speed: 6,500rpm.
• Electrical rating , nominal 230 VAC, 50Hz, (UK/Europe) 900 watt, 110 - 120 VAC, 50-60 Hz (UK Industrial).
• 1000 watt.
• Dust extraction vacuum hose interface 30mm ID, EN 60335-2-69.
• Belt tension.
• 1mm (1/16") maximum mid-span deflection with 25 N (2.5kg) 8lb deflection force.
• Blade mount bolt torque 14N/m (2.0 kg/m), (15ft/lb), unlubricated.
• CE compliance.

Arbortech AS160 Allsaw Includes

• 1 x Moulded Case.
• 1 x set of general purpose blades.
• 1 x motar plunge blade. 
• 1 Year Warranty.