DeWalt D25701K 7kg SDS Max Combi Hammer Drill

DeWalt D25701K SDS Max Combi Hammer Drill Features

• Drilling anchor fixing and through holes into concrete and masonry from 18 to 48 mm.
• Core drilling from 40 to 125 mm.
• Rotation-stop for demolition applications in brick, masonry and light chasing in concrete.
• DeWalt hammer philosophy design: protect mechanism from dust impact, dampen the rebound and develop a low vibration mechanism.
• Active Vibration Control reduces tri-axial vibration by up to 30% according to the Physical Agents Directive 2002/44/EC – HAV.
• Complete Torque Control. The unique patented 2-steps clutch allowed the user to work with a higher protection level.
  • 1st step: small bit (up to 40 mm),
  • 2nd step: higher bit (40 to 48 m) and core bits.
• Floating rear handle.
• Electronic speed and impact energy control.
• Lock-on switch for chipping.
• Brush wear and service indicators.

DeWalt D25701K SDS Max Combi Hammer Drill Specifications

• Power Input 1300 Watts.
• Power Output 840 Watts.
• Load Speed  137-275 rpm.
• Blows per Minute  1260-2520 bpm.
• Impact Energy  2-14 J.
• Max. Drilling Capacity [Concrete]  48 mm.
• Max. Drilling Capacity [Breakthrough bit]  80 mm.
• Max. Drilling Capacity [Core bit]  125 mm.
• Weight  8.3 kg.
• Length  528 mm.
• Height  268 mm.
• Tool Holder  SDS-Max.

DeWalt D25701K SDS Max Combi Hammer Drill Includes

• Multi-position side handle.
• Grease.
• Cloth.
• Heavy duty carrying case.